Industrial
Three-phase electric power is a common method of alternating current electric power generation, transmission, and distribution. It is a type of polyphase system and is the most common method used by grids worldwide to transfer power. It is also used to power large motors and other heavy loads. A three-phase system is generally more economical […]
Portable Appliance Testing (commonly known as PAT or PAT Inspection or PAT Testing) is a process in the United Kingdom, New Zealand and Australia by which electrical appliances are routinely checked for safety. The correct term for the whole process is In-service Inspection & Testing of Electrical Equipment. When people work with electrical appliances, health […]
See what our customers had to say about our work with finding faults in electrical circuits here, here, here, here, here, here, here, and here. Electrical Faults Are a Safety Hazard Electrical faults are a health and safety hazard and could be putting your life in danger. Whether in the home or work environment, electrical […]
See what our customers had to say about our work on Bonding here, and here. Main Bonding (Earthing) Main Bonding is the use of a separate thick (10mm) green and yellow copper cable, to connect the Water, Gas and Oil services to the Earth Terminal in or adjacent to your consumer unit. Connections are made on the […]
Fuses Rewirable fuses have a piece of special wire running between two screws designed specifically to melt and break When a fault or overload current flows through the circuit. The melted fuse breaks the circuit, disconnecting the faulty circuit and keeping you safe. MCB’s – Mini Circuit Breakers These are automatic protection devices in a […]
See what our customers had to say about our Periodic Inspection Reports here, here, here, and here. What is a periodic inspection? An inspection and series of tests to make sure your electrical installation will continue to conform to the national safety standard. A periodic inspection will Reveal if any of your electrical circuits or […]
The purpose of regular testing of your emergency lighting systems is, firstly, to ensure you continue to comply with regulations but – more importantly – to you, the person charged with the responsibility, is to ensure that the emergency lighting provides two safeguards for a building and staff in the event of power failure: First, […]
Three-phase electric power is a common method of alternating current electric power generation, transmission, and distribution. It is a type of polyphase system and is the most common method used by grids worldwide to transfer power. It is also used to power large motors and other heavy loads. A three-phase system is generally more economical […]